subscription ran out

Tue Jul 28 2015, 15:37 by juliecg

hi all thanks for the add
does anybody know how I could update my starview 7 box as my …

Comments: 0

greetings

Mon Jul 13 2015, 05:27 by guffie999

just a few words thanking the people [ & mods ]  on this forum for accepting my application to …

Comments: 4

sly f5 boxes

Sun Apr 26 2015, 22:06 by renault786

hello everyone new to all this, anyone know about slyf5 box

Comments: 1

Affiliates
Get a free Giffgaff Sim ... MrModchips Newsdemon

Channel issues

View previous topic View next topic Go down

Channel issues

Post by chewderrick on Thu May 09 2013, 21:12

Hi guys i hope one of you can help me i have been having problems with some of the channels on my box, they keep losing signal and the message (no/bad signal) pops up then goes and the picture pops up again and all is fine for a bit then it happens again. so far i have tried a factory reset, scanning all the channels again and a hard reboot and nothing seems to change. When i was doing a channel reset i was watching the 2 bars at the top the level bar never drops below 80% but the quality bar goes up and down like a yo yo, when it drop to around 25% in the red it does not pick up any channels but when it is up around 65 - 80% the channels are flying back up. also one last point i only seem to have half the channels i used to have about 480 before in was around the 800 mark. i am at a total loss i really hope you can help

Mad Mad Mad

chewderrick

Number of posts : 3
Registration date : 2013-05-08

Back to top Go down

Re: Channel issues

Post by jonpc on Thu May 09 2013, 21:33

Maybe off the mark have a look at http://www.ultimatecs.com/forum/f81/ and check your picking up the correct TPs.

If not have a look at this thread, http://dooby2oons.googoolz.com/t3255-help-with-blade-needed.

If using latest 9991 firmware try installing previous.

jonpc
.
.

Number of posts : 2771
Registration date : 2008-08-11

Back to top Go down

Re: Channel issues

Post by duff1972 on Fri May 10 2013, 12:43

http://www.ebay.co.uk/itm/No-Signal-Fix-for-Openboxs-s9-s10-s11-s12-SkyBox-F3-F5-Dreambox-SIGNAL-BOOSTER-/290909467016?pt=UK_Sound_Vision_Satellite_LNBs&hash=item43bb8e3188

or try this
avatar
duff1972
Newbie
Newbie

Number of posts : 23
Registration date : 2012-05-17

Back to top Go down

Re: Channel issues

Post by chewderrick on Sat May 11 2013, 15:46

Thanks guys for your help i have tried a few things manual serches etc but the plot thickens i have replaced the lnb and the signal strengh has gone up to 90% which is good but the quality still jumps around when i do a scan. also i have done a few manual scans and found some channels which now work, however i have still lost some odd channels like channel 5 etc.. the strange thing is on my freesat box upstairs i still have channel 5. can anyone think of any other suggestions as i am about to pull my hair out.

chewderrick

Number of posts : 3
Registration date : 2013-05-08

Back to top Go down

Re: Channel issues

Post by jonpc on Sat May 11 2013, 19:56

Is Channel 5 using frequency 10964.00 H S/R 220.00 as stated on
http://www.ultimatecs.com/forum/f81/
if not you may have the same problem as the 2nd post info.
Re: help with blade needed

jonpc
.
.

Number of posts : 2771
Registration date : 2008-08-11

Back to top Go down

Re: Channel issues

Post by chewderrick on Sat May 11 2013, 21:34

thanks for your help jonpc i have been going through the manual scan list and cross ref with kingofsat most are ok there are a couple that are out so changed them but still nada it seem strange that the level meter goes red at the same time as the quality meter even though it still says 85% just got a real horible feeling it maybae a new box for me just going to run a temp cable in tomorrow from upstairs make sure its not that before i go ordering a new box if you know of anyway to test the box let me know

cheers for your help

chewderrick

Number of posts : 3
Registration date : 2013-05-08

Back to top Go down

Re: Channel issues

Post by jonpc on Sat May 11 2013, 22:59

Was running a BM box earlier today at 98%. your dish may have moved slightly with the winds we having.
Try a factory reset,bottom of Dooby's sticky http://dooby2oons.googoolz.com/t2237-blade-7000-hd-3d-all-info#11984
Manual rescan the channels you can't get with a full scan first.

jonpc
.
.

Number of posts : 2771
Registration date : 2008-08-11

Back to top Go down

Re: Channel issues

Post by ZULUCOL58 on Sat May 25 2013, 12:59

Hi
My boxnation gone off
Can anyone tell me tp and channel frequency
Cheers

ZULUCOL58
Expert
Expert

Male
Number of posts : 106
Age : 51
Location : birmingham
Registration date : 2009-09-09

Back to top Go down

Re: Channel issues

Post by jonpc on Sat May 25 2013, 13:05

BoxNation 12606 V S/R 275.0

Tonights fight is not on BoxNation

jonpc
.
.

Number of posts : 2771
Registration date : 2008-08-11

Back to top Go down

Re: Channel issues

Post by ZULUCOL58 on Sat May 25 2013, 17:02

I know
Keep losing channels
Manual scanned boxnation tp
Found it but wont hold soon as moved to sports section goes off

ZULUCOL58
Expert
Expert

Male
Number of posts : 106
Age : 51
Location : birmingham
Registration date : 2009-09-09

Back to top Go down

Re: Channel issues

Post by gray1313 on Tue May 28 2013, 11:48

chewderrick wrote:Hi guys i hope one of you can help me i have been having problems with some of the channels on my box, they keep losing signal and the message (no/bad signal) pops up then goes and the picture pops up again and all is fine for a bit then it happens again. so far i have tried a factory reset, scanning all the channels again and a hard reboot and nothing seems to change. When i was doing a channel reset i was watching the 2 bars at the top the level bar never drops below 80% but the quality bar goes up and down like a yo yo, when it drop to around 25% in the red it does not pick up any channels but when it is up around 65 - 80% the channels are flying back up. also one last point i only seem to have half the channels i used to have about 480 before in was around the 800 mark. i am at a total loss i really hope you can help

Mad Mad Mad
go to blade online astra 28.2e then select your region and update and that should sort your channels out hope that helps

gray1313
Newbie
Newbie

Male
Number of posts : 11
Registration date : 2011-04-17

Back to top Go down

Re: Channel issues

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum