subscription ran out

Tue Jul 28 2015, 15:37 by juliecg

hi all thanks for the add
does anybody know how I could update my starview 7 box as my …

Comments: 0

greetings

Mon Jul 13 2015, 05:27 by guffie999

just a few words thanking the people [ & mods ]  on this forum for accepting my application to …

Comments: 4

sly f5 boxes

Sun Apr 26 2015, 22:06 by renault786

hello everyone new to all this, anyone know about slyf5 box

Comments: 1

Affiliates
Get a free Giffgaff Sim ... MrModchips Newsdemon

Guide to setting up Clarke Tech ET9000 HD

View previous topic View next topic Go down

Guide to setting up Clarke Tech ET9000 HD

Post by saxon210 on Sat Sep 29 2012, 18:55

. Install image.
Download a USB image file, eg Black Hole Image from this forum...

Unzip the ET9000 folder to the root directory of a USB Pen Drive.
Power off Receiver with switch on the back
Insert USB Pen Drive into the USB socket on Receiver
Power on Receiver.
Image Update message will appear on the front display.
Press the OK button behind the front flap.
Image will now install from the USB Stick.
Receiver will reboot once the install is complete.
Image is now installed.

Remove the USB Stick.

--------------------------------------------------------------------------

2. Network
Connect an Ethernet LAN cable from your router to your ET9000 Ethernet port.
Press Menu
Select Set Up Press OK
Select System Press OK
Select Network Press OK
Select Network w i z a r d and press OK.

--------------------------------------------------------------------------

3. How to Setup Motorised Dish using USALS

An Explanation of longitude and Latitude can be found here _
Code:
http://www.satsig.net/lat_long.htm


First get your longitude & latitude info from dishpointer.com
Enter your post code into dishpointer.com and you'll get the correct Longitude & Latitude info for your location.
Example if I enter the following UK postal code: M2 5DB

I get the following Longitude & Latitude:
Longitude: -2.244
Latitude: 53.479

Press Menu
Select Setup Press OK
Select Service searching Press OK
Select Tuner configuration Press OK
Select Tuner A and Press OK

Configuration Mode: Simple
Mode: Positioner
Longitude: 53.479
NORTH
Latitude: 2.244
WEST

Press OK to save.

Press Menu
Select Setup Press OK
Select service searching Press OK
Select Positioner Setup Press OK
Select goto 0 Press RED Button

Dish should now goto 1w.

--------------------------------------------------------------------------

4. Upload a Channel List
Download a pre-configured channel list from this forum

Unzip the Channel List to your local HDD.
Example C:\Catseye E2 Settings File 75 East-58 West


Use ET9000 Control centre to upload channel list to receiver.




--------------------------------------------------------------------------

How to setup Receiver with VBox II DiSEqC 1.2 Positioner.

If your VBox II already has the satellite positions stored and your changing from an old receiver to ET9000 then follow this procedure.

Write down your VBox II satellite position numbers. These are the numbers displayed on the front of the VBox II when moving to a
specific satellite position. These position numbers can also be found in your old receivers motor setup menu.

Example lets say...
Position 1 on VBox II = Astra 19e
Position 2 on VBox II = Eutelsat W2 16e
Position 3 on VBox II = Hotbird 13e

You get the idea...

First send the dish to Astra 19e using Vbox II.

On ET9000 Remote Press Menu
Select Setup Press OK
Select Service Searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK

Now set Configuration Mode to Advanced. Use Left or Right keys on remote to select.

Configuration Mode: Advanced
Satellite: Astra 19e
LNB: 1
DiSEqC mode: 1.2

Scroll down to botton of the page with the down arrow on remote.

Stored position: 001

Press OK to store.

OK that's Astra 19e setup now to setup Eutelsat W2 16e

Now send the dish to Eutelsat 16E using Vbox II.

Select Setup Press OK
Select Service Searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK


Configuration Mode: Advanced
Satellite: Eutelsat W2 16e
LNB: 2
DiSEqC mode: 1.2

Scroll down to botton of the page with the down arrow on remote.

Stored position: 002

Press OK to store.

OK that's Eutelsat W2 16e setup now to setup Hotbird 13e

Now send dish to Hotbird using Vbox II

Select Setup Press OK
Select Service Searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK

Configuration Mode: Advanced
Satellite: Hotbird 13e
LNB: 3
DiSEqC mode: 1.2

Scroll down to botton of the page with the down arrow on remote.

Stored position: 003

Press OK to store.

You get the idea, now repeat for the rest of the satellites and your done.
avatar
saxon210
Adviser
Adviser

Male
Number of posts : 94
Age : 51
Location : Manchester
Registration date : 2012-02-08

Back to top Go down

Re: Guide to setting up Clarke Tech ET9000 HD

Post by baggiebri on Sun Sep 30 2012, 10:38

Keep up the good work mate Very Happy
avatar
baggiebri
.
.

Male
Number of posts : 1382
Age : 53
Location : Black Country
Registration date : 2008-11-15

Back to top Go down

Re: Guide to setting up Clarke Tech ET9000 HD

Post by adiraian on Sun Sep 30 2012, 17:08

Thanks mate... one of the gr8 box....
avatar
adiraian
VIP
VIP

Number of posts : 405
Registration date : 2008-09-11

Back to top Go down

Re: Guide to setting up Clarke Tech ET9000 HD

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum